V81

Pressures rating of 68.9 bar (1000 psig) and 137 bar (2000 psig)

Spec. ─────────────────────────────

• Working Pressure : 2,000 psig

• Stainless Steel and Brass

• DK-Lok 1/4 to 1 in. OD

• Pipe thread 1/4 to 2 in.

• Seat : PTFE (Standard), TFM (Optional)

Brief Description. ──────────────────────

• Compact barstock construction for high integrity.
• Blow-out proof design with internally loaded stem.
• Floating Ball design providing seat wear compensation.
• Micro-finished ball ensures a leak-tight shut-off on pressure.
• Standard lever handle, optional butterfly and dielectric handle.

V82

Pressure Rating up to 3,000psig

Spec. ─────────────────────────────

• Working Pressure : 3,000 psig

• Stainless Steel and Brass

• 2-way and 3-way actuation

• DK-Lok 1/16 to 3/4 in. OD

• Pipe thread 1/8 to 1/2 in.

Brief Description. ──────────────────────

V82 series Ball valves are classfied into 3 types according to the temperature range in use.

V82 series is for general use and VL82 is adequate to the low temperature range.

VG82 can be used in the widen temperature range from low to high temperature.

The exact temperature range of each type is referred to the technical data of the type.

V83

Pressure Rating up to 3,000 psig (206 bar)Features

Spec. ─────────────────────────────

• Working Pressure : 3,000 psig
• Stainless Steel and Carbon Steel
• DK-Lok 1/4 to 1 in. OD
• Pipe thread 1/8 to 1 in.

Brief Description. ──────────────────────

• Pressure and temperature compensation seat design.
• Swing-out design for fast and easy maintenance with the valve in-line.
• Chevron packing design.
• 2-way (on-off) valves with quarter-turn actuation.

V86

Pressure Rating up to 689 bar (10,000psig)

Spec. ─────────────────────────────

• 2-way on-off Valves
• 3-way on-off Valves
• Working Pressure : 10,000 psig
• Stainless Steel and Carbon Steel
• DK-Lok 1/4 to 1 in. OD
• Pipe thread 1/4 to 1 in.

Brief Description. ──────────────────────

• Blowout proof design with internally loaded stem.
• Handle indicates the flow direction.
• Positive stop with a robust stop pin.
• High flow rate with maximum orifice.
• Various end ports including DK-Lok tube port.
• Various flow control with side and bottom inlet port on 3-way diverter valves.
• Designed to control fluids in full open or full closed position.

VH86

High Pressure Multi Purpose Ball ValvesFeatures

Spec. ─────────────────────────────

• 2-way bi-directional Valves
• 3-way diverter Valves
• Working Pressure : 6,000 psig
• Stainless Steel
• DK-Lok 1/8 to 3/4 in. OD
• DK-Lok 3mm to 16mm OD
• Pipe thread 1/8 to 1/2 in.

Brief Description. ──────────────────────

• High flow in a compact design.
• High pressure capacity designed for blow-out proof with internally loaded ball stem.
• Micro-finished ball provides a positive seal.
• 90 degree actuation for 2-way and 180 degree actuation for 3-way ball valves.
• Panel mounting as standard.
• Chevron stem seal, adjustable with the handle disassembled.
• Handle indicates flow direction.
• Low operating torques and positive handle stops.
• Optional pneumatic actuation.

VT86

VT86 Series Pressure Rating up to 413bar (6,000 psig)

Spec. ─────────────────────────────

• 2-way on-off Valves
• 3-way on-off Valves
• Working Pressure : 6,000 psig for VT86 Series 10,000 psig for VTH86 Series
• Stainless Steel
• DK-Lok 1/4 to 1/2 in.

Brief Description. ──────────────────────

• The Trunnion ball valve is featured by blowout-proof design with cylindrical extensions at the top and bottom  of the ball.
• The trunnion prevents the ball from shifting and permits  the ball to rotate on a vertical axis.
• Integral ball stem machined from single piece of bar stock eliminates the backlash during handle actuation.
• Panel mounting nut is standard permitting valve to panel or actuator.
• Designed to control fluids in full open or full closed position.

V87

Pressure Rating up to 500 bar(7,250 psig)

Spec. ─────────────────────────────

• Up to 7,250 psig (500bar)
• Up to 100℃ (212℉)
• DIN 1,4404, SS316L
• DIN O.D 6mm ~ 38mm
• Pipe thread 1/8 ~ 1 in.
• Ball valve to DIN standard

Brief Description. ──────────────────────

• Positive stop with robust stop pin
• Various end ports including DIN Standard port
• Hydraulic fluids
• Compressed Air
• Fuel oil system

V23

Pressure Rating up to 3,000 psig (206 bar)

Spec. ─────────────────────────────

• Working Pressure : 3,000 psig
• Stainless Steel and Brass
• Forward flow throttling
• Pipe thread 1/8 to 1/2 in.

Brief Description. ──────────────────────

• Positive shut-off, high flow capacity
• Quick quarter-turn operation
• Unique forward flow throttling
• Low torque operation
• Unidirectional flow
• Optional downstream vent

DBB

Spec. ─────────────────────────────

• Class 150 through 2,500 to ASME B16.5
• Up to 204℃ (400℉)
• SS316
• Flange size 1/2 to 2 in. (DN15-DN50)
• Blowout proof valve stem and needle
• Fire tested as per BS 6755 part 2.

Brief Description. ──────────────────────

• Reduced potential leak paths with primary & secondary isolation in one valve
• Compact ball/OS&Y/needle valve assembly in one DBB
• Flange construction as per the requirements of ASME B16.5
• Pressure ratings as per ASME B16.34 Class 150 through 2,500
• Wetted components of Sour gas service valve are selected as per the requirements of NACE MR0175 / ISO 15156.
• Fire tested as per BS 6755 part 2.

Mono

Spec. ─────────────────────────────

• Class 150 through 2,500 to ASME B16.5
• Up to 204℃ (400℉) – PTFE Packing
• Up to 454℃ (850℉) – Graphite Packing
• Flange size 1/2 to 2 in. (DN15-DN50)

Brief Description. ──────────────────────

• ASME B16.5 flanged inlet connections 1/2” to 2” sizes.
• Standard 1/2” NPT female outlet.
• Bleed port 1/2” NPT female with Hex Plug is standard.
• OS&Y with graphite packing is standard, optional PTFE.
• Needle valve with PTFE packing is standard, optional Graphite.
• Optional fire safe design as per BS 6755 Part 2.
• Optional NACE certification.

Copyright ⓒ All Right Reserved by Filson Engineering Co.