Hydraulic Swaging unit DHS

Hydraulic Swaging Unit DHS-2A Setup and Operating Instuction.

Brief Description. ──────────────────────

• Pre-Swages Dk-Lok ferrules onto tubing :
Fractional : 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″
Metric : 12, 14, 15, 16, 18, 20, 22, 25, 28, 30, 32, 38 and 50 mm
• Assure consistent make-up the with only about 30% of  the manual pull-up torque.
• Reducers installation time.
• Easy to use by one operation
• Different size can be pre-swaged just by replacing Die and Jig.
• Portable with wheels on sturdy aluminum carrying case.

Electric Swaging Unit DES

Hydraulic Swaging Unit

Spec. ─────────────────────────────

• Hydraulic Pump : 0.35~2.01 kW/min
• Operation pressure : 0~600 bar
• Connection : 220V / 110V / 1 phase 50~60Hz / 2.5A
• Dimension : 400 x 400 x 230 mm
• Weight : 48kg

Brief Description. ──────────────────────

• Re-swage Dk-Lok ferrules onto tubing
Fractional: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”
Metric: 12 mm, 20 mm, 28 mm, 32 mm, 38 mm
• Standard 220V & Optional 110V
• Assure consistent makeup free from the manual pull-up torque
• Reduce installation time
• Easy to use by one operation
• Different size can be pre-swaged just by replacing Die and Jig
• Portable in sturdy plastic case

Preswaging Tool DPS

Hydraulic Swaging Unit

Spec. ─────────────────────────────

• Material : SKD-11
• Size : 1/8″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, and 1″
• Size : 3mm, 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 25mm and 28mm

Brief Description. ──────────────────────

• Preswages ferrules onto the tube
• Enables the installer to work in a more open, safe area
• Makes it possible to complete the intallation by following retightening instructions for DK-Lok tube fittings.

Gap Gauge DIG

Spec. ─────────────────────────────

• Material : Stainless Steel 316
• Size : 1/4″, 5/16″, 3/8″, 1/2″, 3/4″, and 1″
• Size : 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm and 25mm

Brief Description. ──────────────────────

• Assure the installer or inspector that the fitting has been sufficiently pulled up on initial installation.
• Useful tool to inspect the DK-Lok initially pulled-up.

Tub Depth Marking Tool DTM

Spec. ─────────────────────────────

• Material : Carbon Steel
• Size : 1/8″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, and 1″
• Size : 6mm, 8mm, 10mm, 12mm, 16mm, and 25mm

Brief Description. ──────────────────────

• DK-Lok depth marking tools help ensure that tubing is bottomed on the shoulder inside the DK-Lok fitting body.
• Marking on tubing prior to make-up with DK-Lok

Copyright ⓒ All Right Reserved by Filson Engineering Co.